4
Item
Specification
Ports
•
2 × GE SFP management port for the switching control units
•
2 × 10/100/1000BASE-T management port for the switching control units
•
1 × USB port for the X86 server unit
•
1 × BMC port for the X86 server unit
•
1 × 10/100/1000BASE-T port for the X86 server unit
•
2 × 10GE SFP+ port for the X86 server units
•
1 × console port for the switching control unit
Transmission rate
•
Console port:
≤ 115200 bps (default: 9600 bps)
•
SFP port: 1000 Mbps
•
SFP+ port: 10 Gbps
•
10/100/1000BASE-T port: 10/100/1000 Mbps
•
USB port: 480 Mbps
•
BMC port: 10/100/1000 Mbps
Compatible device
models
•
S12516X-AF
•
S12512X-AF
•
S12508X-AF
Interface module adapter
Some S12500-X interface modules (also called LPUs) are compatible with the switch, but the switch
has higher and wider LPU slots than the S12500-X switch. To install an S12500-X LPU in an LPU slot,
first install an interface module adapter in the slot. The available interface module adapter is
LSXM1IMA.
LPUs
The switch supports both the S12500X-AF LPUs and FX and FE series S12500-X LPUs. For the
LPU specifications, see
S12500X-AF LPUs
No interface module adapter is required to install an S12500X-AF LPU on the switch.
To prevent card damage and ensure correct operation, follow these guidelines before installing
LPUs:
•
Type F LPUs must be used with Type F switching fabric modules.
•
Type H LPUs must be used with Type H switching fabric modules.
•
Type T LPUs must be used with Type T switching fabric modules.
To use the LSXM1CGQ48HB1, LSXM1CGQ36HB1, LSXM1CGQ36HF1, LSXM1CGQ18QGHF1,
LSXM1CGQ36TD1, LSXM1CGQ48KB1, or LSXM1CDQ24KB1 LPU on the switch, you need to
choose high-performance fan trays for the switch. See
for information about the available
fan trays.
