background image

 

57 

LED Status 

Description 

Micro SD card LED 

Steady green 

The Micro SD card is present and has passed the 
test. 

Off 

No Micro SD card is inserted or the Micro SD card is 
installed incorrectly. 

LTE LED 

Steady green 

A 4G link is present. 

Flashing green (8 Hz) 

Data is being received or transmitted on a 4G link. 

Steady yellow 

A 3G link is present 

Flashing yellow (8 Hz) 

Data is being received or transmitted on a 3G link. 

Off 

No 3G/4G link is present or no 4G modem is installed.

SIM card slot LED 
(SIM0 and SIM1) 

Steady green 

A SIM card is present. 

Flashing green (1 Hz) 

The SIM card is being used for dial-up. 

Flashing green (8 Hz) 

The 4G port for the SIM card is sending or receiving 
data. 

Steady yellow 

The SIM card is faulty. 

Off 

No SIM card is present, or the 4G module is not 
present or is being initialized. 

Signal strength LEDs 

Four green LEDs on 

Very strong 4G signal (RSSI 

 –75 dBm) 

Three green LEDs on 

Strong 4G signal (–85 dBm 

 RSSI < –75 dBm) 

Two green LEDs on 

Weak 4G signal (–95 dBm 

 RSSI < –85 dBm) 

One green LED on 

Very weak 4G signal (–110 dBm 

 RSSI < –95 dBm) 

Four yellow LEDs on 

Very strong 2G/3G signal (RSSI 

 –75 dBm) 

Three yellow LEDs on 

Strong 2G/3G signal (–85 dBm 

 RSSI < –75 dBm) 

Two yellow LEDs on 

Weak 2G/3G signal (–95 dBm 

 RSSI < –85 dBm) 

One yellow LED on 

Very weak 2G/3G signal (–110 dBm 

 RSSI < –95 

dBm) 

Four LEDs off 

Unavailable network (RSSI < –110 dBm) 

2.4G WLAN status 
LED 

Steady green 

A 2.4G WLAN link is present. 

Flashing green 

Data is being received or transmitted on a 2.4G 
WLAN link. 

Off 

No 2.4G WLAN link is present. 

5G WLAN status LED 

Steady green 

A 5G WLAN link is present. 

Flashing green 

Data is being received or transmitted on a 5G WLAN 
link. 

Off 

No 5G WLAN link is present. 

CNDE LED 

Steady green 

A link is present between the router and another 
device, but data encryption is not performed. 

Flashing green (8 Hz) 

Date is being encrypted. 

Off 

No power is input or no data is being encrypted. 

Summary of Contents for MSR810


































































Reviews: