Manual version: 6PW103-20141219
BOM: 3123A0MR
ii
Item Specification
Weight
3.9 kg (8.60 lb)
Hot swapping
Supported
Interfaces
•
1 console port
•
2 USB ports (hardware reserved, software not support)
•
2 combo interfaces, which can operate in 10/100/1000BASE-T copper port
mode or 1000BASE-X SFP fiber port mode at a time.
You can use the
combo
enable
{
copper
|
fiber
} command to activate either
port. By default, the copper combo port is activated.
Ambient temperature
•
Operating: 0°C to 45°C (32°F to 113°F)
•
Not operating: –40°C to +70°C (–40°F to +158°F)
Ambient relative humidity
•
Operating: 10% to 95%, noncondensing
•
Non-operating: 5% to 95%, noncondensing
Compatible device models
and slots
•
S10500 switches ( For the card to operate correctly, do not install the card in
slots 4 to 9 of the S10510 )
•
S7600-X switches ( For the card to operate correctly, do not install the card in
slots 4 to 9 of the S7610-X )
•
S7500E switches
•
S7600 switches
•
SR8800-X routers
System software version
See the release notes that come with the card.
Table 2 Console port specifications
Item Specification
Connector RJ-45
Interface standard
RS-232
Transmission baud rate
9600 bps (default) to 115200 bps
Transmission medium
Asynchronous serial cable
Transmission distance
≤
15 m (49.21 ft)
Services
•
Provides connection to an ASCII terminal.
•
Provides connection to the serial port of a local or remote (through a
pair of modems) PC running terminal emulation program.
•
Supports command line interface (CLI)
Table 3 10/100/1000BASE-T copper port specifications
Item Specification
Connector RJ-45
Interface standard
802.3, 802.3u, and 802.3ab
Interface type
MDI/MDIX autosensing
Supported cable
Category-5 (or above) twisted pair cable
Transmission distance
100 m (328.08 ft)
