8
4.
Pivot the ejector levers toward the front panel to lock the access controller module
in place.
5.
Using a Philips screwdriver, fasten the captive screws on the access controller
module.
6.
If the switch is powered off, power on the switch.
Initial startup of the access controller module
Setting up a configuration environment
Set up a configuration environment by connecting the console port of the
LSQM1WCMB0 access controller module to a console terminal, a PC in this example.
Connecting the console cable
1.
Connect the DB-9 female connector of the console cable to the serial port of the
PC.
2.
Connect the RJ-45 connector of the console cable to the console port of the
LSQM1WCMB0 module.
Setting terminal parameters
Before configuring your access controller module through a console terminal, a PC
running Microsoft Windows XP, for example, set the following parameters for the console
terminal:
Bits per second: 9600
Data bits: 8
Parity: none
Stop bits: 1
Flow control: none
Terminal emulation: VT100 or Auto detect.
To set these parameters:
1.
Start the computer and select
Start
>
Programs
>
Accessories
>
Communications
>
HyperTerminal
. The
Connection Description
dialog box appears.
