7
LEDs
接口状态指示灯
The SFP and 10/100/1000Base-T autosensing Ethernet port LEDs are not
affected by the port LED mode switching button on your switch. For more
information about the port LED mode switching button, see the installation
guide for the switch.
该指示灯不受交换机上端口状态指示灯模式切换按钮的影响，关于端口状态
指示灯模式切换按钮的详细介绍请参见交换机的配套安装手册。
LED Status
指示灯状态
Description
指示灯含义
SFP port LED SFP
口指示灯
Steady green
绿色常亮
A transceiver module is installed in the port. The port is operating at
1000 Mbps, and a link is present on the port.
模块已安装，端口工作在
1000M
模式下，并且端口
Link Up
Flashing green
绿色闪烁
The port is sending or receiving data at 1000 Mbps.
端口工作在
1000M
模式下，正在接收或发送数据
Steady yellow
黄色常亮
A transceiver module is installed in the port. The port is operating at
100 Mbps, and a link is present on the port. This LED status is
available only for SFP ports 5 and 6.
模块已安装，端口工作在
100M
模式下，并且端口
Link Up
（仅编号为
5
～
6
的
SFP
口支持该状态）
Flashing yellow
黄色闪烁
The port is sending or receiving data at 100 Mbps. This LED status
is available only for SFP ports 5 and 6.
端口工作在
100M
模式下，正在接收或发送数据（仅编号为
5
～
6
的
SFP
口支持该状态）
Off
灯灭
No transceiver module is installed in the port, or no link is present on
the port.
模块没有安装或端口没有
Link Up
10/100/1000Base-T autosensing Ethernet port LED 10/100/1000Base-T
自适应以太网端口
指示灯
Steady green
绿色常亮
The port is operating at 1000 Mbps, and a link is present on the port.
端口工作在
1000M
模式下，并且端口
Link Up
Flashing green
绿色闪烁
The port is sending or receiving data at 1000 Mbps.
端口工作在
1000M
模式下，正在接收或发送数据
Steady yellow
黄色常亮
The port is operating at 10/100 Mbps, and a link is present on the
port.
端口工作在
10/100M
模式下，并且端口
Link Up
Flashing yellow
黄色闪烁
The port is sending or receiving data at 10/100 Mbps.
端口工作在
10/100M
模式下，正在接收或发送数据
Off
灯灭
No link is present on the port.
端口没有
Link Up
