4
Verifying the installation
安装完成后的检查
After the installation is complete, determine whether the card is operating
correctly. If the card fails to operate correctly, perform the following steps:
•
Reinstall the card following the installation procedures described in this
document.
•
If the problem persists, contact H3C Support.
全部安装完成后，在交换机运行正常的情况下，若发现接口模块扩展卡无法
正常工作：
•
您可以按照手册中介绍的方法重新安装接口模块扩展卡。
•
如果重新安装后，接口模块扩展卡仍无法正常工作，请您联系
H3C
技术支
持人员。
Ports
接口
•
You can install GE SFP transceiver modules, SFP cables, FE SFP
transceiver modules, and SFP cables in the SFP ports. SFP+
口可选配千
兆
SFP
模块、百兆
SFP
模块、
SFP
电缆。
•
The SFP-GE-LX-SM1310-BIDI and SFP-GE-LX-SM1490-BIDI
transceiver modules must be used in pairs. SFP-GE-LX-SM1310-BIDI
与
SFP-GE-LX-SM1490-BIDI
两款模块需要成对使用。
•
The SFP-FE-LX-SM1310-BIDI and SFP-FE-LX-SM1550-BIDI
transceiver modules must be used in pairs. SFP-FE-LX-SM1310-BIDI
与
SFP-FE-LX-SM1550-BIDI
两款模块需要成对使用。
•
Only SFP ports 5S and 6S support FE SFP transceiver modules.
仅编号
为
5S
和
6S
的
SFP
口支持百兆
SFP
模块。
•
H3C transceiver modules and cables available for the card are subject to
change over time. For the most recent list of H3C transceiver modules
and cables available for the card, contact H3C Support or marketing staff.
接口模块扩展卡支持的光模块和线缆的种类随着时间变化有更新的可能
性，若您需要准确的选购信息，请咨询
H3C
公司市场人员或技术支持人员。
•
For H3C transceiver module and cable specifications, see H3C
Transceiver Modules User Guide at www.h3c.com.
光模块和线缆的具体
规格，请您参见
H3C
网站发布的《
H3C
光模块手册》。
