5-2
Configuration terminal display issues
No display on the configuration terminal
Symptom
The switch starts up but the configuration terminal does not have any display.
Resolution
To resolve the issue:
1.
Verify that the power supply is supplying power correctly to the switch.
2.
Verify that the console cable is connected correctly.
3.
Verify that the console cable is in good condition.
4.
Verify that the terminal settings are correct.
5.
If the issue persists, contact H3C Support.
Garbled display on the configuration terminal
Symptom
The configuration terminal displays garbled texts.
Resolution
To resolve the issue:
1.
Verify that the configuration terminal settings are correct, as follows:
{
Baud rate
—9,600.
{
Data bits
—8.
{
Parity
—None.
{
Stop bits
—1.
{
Flow control
—None.
2.
If the issue persists, contact H3C Support.