59
Front panel
Figure 54 Front panel
(1) Captive screw
(2) E1 interfaces (16 in total)
(3) E1-HM96 interface LED (ACT/ALM)
LEDs
Table 86 LED description
LED
Status
Description
E1-HM96 interface
LED (ACT/ALM)
Flashing green
The interface is sending or receiving data correctly.
Steady green
The interface is up and is not sending or receiving data.
Steady red
An alarm has occurred.
Interface specifications
Table 87 Interface specifications
Item
Specification
Connector type
HM96
Number of interfaces
16
Interface type
E1
Interface rate
2.048 Mbps
Cable type
BNC 75-ohm E1 cable, 3.0m, (HD96 female), SYFVZP-75-1-1 grey,
32*BNCSM
Cable characteristic
impedance
75 ohm
MIC-X-CNDE-SJK
CAUTION:
•
Do not run services or remove an MIC-X-CNDE-SJK interface module when the module is
starting up. Wait until the RUN LED is steady green or is flashing green for 30 seconds.
•
Before removing an MIC-X-CNDE-SJK interface module during device operation, press and hold
the REMOVE button on the module until the RUN LED is off.
A MIC-X-CNDE-SJK interface module is a State Cryptography Administration (SCA) SM encryption
module. It supports SM1, SM2, and SM4 encryption algorithms and provides high performance and
reliable data encryption features for routers.
3
1
2