22
Front panel
Figure 19 Front panel
(1) Captive screw
(2) SFP port
(3) Ejector lever
(4) SFP port LED
LED
Table 27 LED description
Status
Description
Off
No link is present.
Steady green
A 1000 Mbps link is present.
Flashing green
Data is being transmitted or received at 1000 Mbps.
Steady yellow
A 100 Mbps link is present.
Flashing yellow
Data is being transmitted or received at 100 Mbps.
Interface specifications
Table 28 SFP port specifications
Item
Specification
Connector type
SFP
Number of interfaces
8
Interface standards
802.3, 802.3u, 802.3ab
Frame format
•
Ethernet_II
•
Ethernet_SNAP
Transmission rate
•
100/1000 Mbps, half/full duplex
The following transceiver modules are available for the HIM-8GBP-V2:
•
100 Mbps fiber SFP transceiver modules.
•
1000 Mbps fiber SFP transceiver modules.
•
100/1000 Mbps fiber SFP transceiver modules.
•
10/100/1000 Mbps copper SFP transceiver modules (support for 10/100/1000 Mbps
autosensing on the HIM-8GBP-V2).
Prepare the transceiver modules yourself as required.
As a best practice, use H3C SFP transceiver modules for the device. H3C does not guarantee the
compatibility of SFP transceiver modules from other vendors with the device. The device reports an
alarm when non-H3C SFP transceiver modules are installed.
1
2
4
3