39
Item
Specification
Working modes
T3
Services supported
T3 leased line
Interface cables
The MIM-1T3-V2 provides two SMB interfaces, with one interface acting as the transmission end (Tx)
and the other as the receiving end (Rx). The Tx and Rx interfaces operate in the 75-ohm unbalanced
transmission mode and thereby need a pair of 75-ohm unbalanced coaxial cables in use for
connection with the peer device.
NOTE:
•
The MIM-1T3-V2 and MIM-1CE3 use the same type of E3/T3 cable.
•
The E3/T3 cable is an optional accessory for the MIM-1T3-V2 to be separately ordered if needed.
•
For the appearance and connection of an E3/T3 cable, see "
Connecting a CE3/CT3/T3 interface
."
MIM-2SAE/MIM-4SAE/MIM-8SAE
The MIM-2SAE, MIM-4SAE, and MIM-8SAE are 2/4/8-port enhanced synchronous/asynchronous
serial interface modules.
The MIM-2SAE/MIM-4SAE/MIM-8SAE only works in synchronous mode to receive, send and
process the synchronous serial data. The MIM-2SAE/MIM-4SAE/MIM-8SAE supports the DTE/DCE
mode.
Front panels
Figure 34 Front panel of MIM-2SAE
(1) Serial interface
(2) Serial interface LINK LED
(3) Captive screw
(4) Serial interface ACT LED
Figure 35 Front panel of MIM-4SAE
(1) Serial interface
(2) Serial interface LINK LED
2
3
1
4
2
3
1
4