Operation Manual – HWPing
H3C S5100-SI/EI Series Ethernet Switches
Chapter 1 HWPing Configuration
1-14
To do…
Use the
command…
Remarks
Configure the
destination port
destination-port
port-number
Required in a Tcpprivate test
A Tcppublic test is a TCP connection
test on port 7. Use the
hwping-server
tcpconnect
ip-address
7 command on
the server to configure the listening
service port; otherwise the test will fail.
No port number needs to be
configured on the client; any
destination port number configured on
the client will not take effect.
By default, no destination port number
is configured.
Configure the
source IP address
source-ip
ip-address
Optional
By default, the source IP address is
not specified.
Configure the
source port
source-port
port-number
Optional
By default, no source port is specified.
Configure the test
type
test-type
{
tcpprivate
|
tcppublic
}
Required
By default, the test type is ICMP.
Configure the
number of probes
per test
count
times
Optional
By default, one probe is made per
time.
Configure the
automatic test
interval
frequency
interval
Optional
By default, the automatic test interval
is zero seconds, indicating no
automatic test will be made.
Configure the
probe timeout time
timeout
time
Optional
By default, a probe times out in three
seconds.
Configure the
maximum number
of history records
that can be saved
history-records
number
Optional
By default, the maximum number is
50.
Configure the type
of service
tos
value
Optional
By default, the service type is zero.
Start the test
test-enable
Required
Display test
results
display hwping
results
[
admin-name
operation-tag
]
Required
The
display
command can be
executed in any view.
