Operation Manual – Login
H3C S5100-SI/EI Series Ethernet Switches
Chapter 2 Logging In Through the Console Port
2-7
Authentication
mode
Authentication related
configuration
Remarks
Set the authentication mode to
scheme
Specify to perform local authentication
or remote authentication
Scheme
Set user names and passwords locally
or on AAA Server
Refer to
Console Port
Login Configuration
with Authentication
Mode Being Scheme
.
Note:
Changes made to the authentication mode for console port login takes effect after you
quit the command-line interface and then log in again.
2.5 Console Port Login Configuration with Authentication
Mode Being None
2.5.1 Configuration Procedure
Follow these steps to configure console port login with the authentication mode being
none:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter AUX user interface
view
user-interface aux
0
—
Configure not to
authenticate users
authentication-mode
none
Required
By default, users logging in
through the console port (AUX
user interface) are not
authenticated.
2.5.2 Configuration Example
I. Network requirements
Assume that the switch is configured to allow users to log in through Telnet, and the
current user level is set to the administrator level (level 3). Perform the following
configurations for users logging in through the console port (AUX user interface).
z
Do not authenticate the users.