1
Configuring the network adapter
The figures in this section are for illusion only.
Viewing mapping relations between network
adapter ports and ICM ports
To view the mapping relations between the network adapter ports and ICM ports, log in to OM and
access the
Compute Nodes
>
Port Mapping
page.
Verifying the identification status of network
adapter ports in the operating system
This section describes how to verify if the network adapter ports have been identified by the
operating system. It uses CentOS 7.4 and Windows Server 2012 R2 as examples.
Linux operation systems
1.
Execute the
lspci
|
grep
BCM57840
command to view PCI device information for the
ETH521i network adapter. The four PCI devices represent the four ports of the network
adapter.
Figure 1 Viewing PCI device information
2.
Execute the
ifconfig
-a
command to verify that the four network adapter ports are
recognized. The port names are determined by the operating system naming rule. If no ports
are recognized, install the most recent driver and try again. For more information, see "
and removing a network adapter driver in the operating system
