21
Configuring FCoE SAN
This document uses Windows, RHEL 7.5, and CAS E0706 as examples to describe how to configure
FCoE SAN for the network adapter.
Windows operating systems
1.
Configure FCoE on the FCoE storage device and switching fabric modules and make sure the
FCoE link is unblocked. For how to configure FCoE on a switching fabric module, see the
related command reference and configuration guide.
2.
Open
Control Panel
, select
Hardware
>
Device Manager
>
Storage controllers
, right click
the FCoE adapter, and then select
Scan for hardware changes
.
Figure 47 Scanning for FCoE network storage device
3.
Click the
Start
icon to enter the menu and open
Disk Management
. Verify that a disk is in
Unknown
state.
Figure 48 Disk Management
