25
Figure 56 Creating and copying a configuration file for the FCoE port
5.
Execute the
vi
cfg
-
ethM
command to edit and save the configuration file. Make sure the
value of the
FCOE_ENABLE
field is
yes
and the value of the
DCB_REQUIRED
field is
no
.
Figure 57 Editing the configuration file
6.
Execute the
lldptool
set-lldp -i
ethM
adminStatus=disabled
command to set
the LLDP management state to
disabled
. Verify that the value of the
adminStatus
field of
ethM
in the
/var/lib/lldpad/lldpad.conf
configuration file is
0
.
If the command execution fails, add
adminStatus = 0
to
ethM
for
lldp
in the configuration file
manually.
Figure 58 Disabling LLDP management
7.
Execute the
service
fcoe
restart
and
service
lldpad
restart
commands to
restart the RCoE and LLDP services, respectively.
Figure 59 Restarting the RCoE and LLDP services
8.
Execute the
ifconfig
command to verify that a subinterface for
ethM
has been created. The
subinterface number is the VSAN number configured on the switching fabric module.
