H2O Fitness Seattle Wooden Rower, Manual

Page: 14 / 19

Note:
.
1. The computer will start automatically when receiving signal from the optional chest belt or pressing any key.
2. The display will turn off automatically after 3 minutes without any activity.
3. The computer will clear data of 500M, Time, SPM, Distance and Calories/hour automatically without receiving any speed signal after 40 seconds.
4. Under normal condition, make sure the symbol appear on the display before measuring your heart rate. The symbol will disappear automatically when the
computer does not receive any signal from transmitter after 30 seconds. Press “SET” or “RESET” to wake up heart rate function, the symbol will turn on again.
Tips: Moisten Transmitter Contacts (for dry skin user)
Before wearing the transmitter chest strap, moisten the 2 rectangular rubber pads (electrodes) located on the inside surface of the chest transmitter.
Use water or saliva to moisten these pads.
Adjusting the strap
The strap should be worn tight enough to prevent the transmitter from bouncing or sliding, but not so tight as to be uncomfortable.
Positioning the Transmitter
The transmitter should be positioned below the breast or pectoral muscles with the middle centered on the chest, and fasten. The transmitter starts to send a
signal after worn.
13