|
23
Water Level Switch WPS 5000
6.2 sensItIVIty
SEns 100
The display will show
“sens”
(sensitivity). In this menu the sensitivity of the
sensor can be adjusted. Default value is 100 kOhm. The value can be changed
by using the „
“ buttons.
The input range is from 10 kOhm to 200 kOhm. The selected setting is confirmed
by pressing the „SET“ button. The unit will switch to the next menu item.
6.2 Delay
dEl 30
The display will show
“del”
(delay). In this menu the delay time can be set
before the relay is switched after the detection of the sensor. Default value is 30
seconds. The value can be changed by using the „
“ buttons.
The input range is from 1 – 9999 seconds. The selected setting is confirmed by
pressing the
„set“
button. The unit will switch to the next menu item
