22
| LEDs and buttons
5. leDs anD Buttons
leDs
1. leD‘s „sensor“:
The water has activated the sensor (water contact)
2. leD „set“:
The device is in the programming mode
3. leD „relay“:
The relay is switched on;
Buttons
1. press
:
Increase the value
2. press
:
Decrease the value
3. press
„set“:
confirms a selected value
6. Menu
When the
„set“
button is pressed, the unit goes into Setup Mode. The „SET“
LED is switched on.
note:
Each menu item consists of two digits that appear in sequence. The first
display shows the name of the menu or item (for about 0.5sec.), the second
displays the value.
6.1 functIon
Func
1
The display will show
„func“
(function). In this menu the function of the relay
is set in connection with the delay function. The value can be changed by using
the „
“ buttons.
two functions are offered:
Delay Relay “On” (1) and Delay Relay”Off
“(2). The selected setting is confirmed by pressing the
„set“
button. The unit will
switch to the next menu item.
