www.myhtec.com
11
Fig. 2: Installation 1
n
1. Place the demonstration model on a firm and clean base. Bring the supporting feet in position.
The supporting feet must be centred in the recesses of the demonstration model.
n
2. Screw in the Allen screws of the supporting feet until they come in contact with the surface
of the demonstration model. Then fix the supporting feet on the demonstration model with
another
half
turn of the Allen screws.
NOTICE
Tightening the screws
Excessive tightening of the screws may cause damage to the
product.
Installation of supporting feet
The following process steps are not required for demonstration models with the aluminium case
with insert. In this case, the supporting feet are already pre-installed.
1
2
Summary of Contents for DEMO House
Page 1: ...Operating Instructions D111 DEMO House...
Page 26: ...26 www myhtec com Notes...
Page 27: ...www myhtec com 27 Notes...
