12
www.myhtec.com
1. Place a washer over each of the four bolts.
Insert the bolts into one of the housing plate and
turn it upside down so it is resting on the head
of the bolts.
2. Place the positive (red) perforated plate on the
acrylic housing. The thicker side of the seal, with
the front of the banana jack, should face the
acrylic. The electrode should point upward.
Assembly
Assembly of the cell is the reverse of the dismantling. If reassembling with the air plate, Step 1
should be done with air plate instead of hydrogen plate. Always wear gloves when handling the
membrane.
