h/p/cosmos 170-190/65 Series Original Instructions Manual Download Page 50

Page: 50 / 99

page 50 of 99

cos105000_170-190_65, rev. 1.03

Description

Illustration

The maximum allowed lateral position of the running belt is

marked with this label.

Operate the device at 10 km/h.
Turn the LEFT trimming screw very slowly
(¼ rotation – observe – ¼ rotation – observe…).

Turn clockwise to adjust belt to the right.
Turn counter-clockwise to adjust belt to the left.
After adjustment, observe the running belt at 10 km/h for at

least 2 min.
Belt must maintain the position.

Remove Allen key from screw.

11.4 Adjustment of running belt

❚

Unmeant trapping hazards: Take off ties, scarfs or other clothes that may be trapped. Secure long hair and ribbons during

maintenance and training in order to prevent being captured in trapping zones.

❚

Do not touch the running belt while it is in motion.

❚

A second person has to be present during maintenance.

Summary of Contents for 170-190/65 Series




































































































Search results

Summary of Contents for 170-190/65 Series

Reviews:

Related manuals for 170-190/65 Series

Brands by name

Popular brands

h/p/cosmos 170-190/65 Series, Original Instructions Manual

Search results

Summary of Contents for 170-190/65 Series

Reviews:

Related manuals for 170-190/65 Series

Brands by name

Popular brands