H-KING Cloud Clipper, Building Instructions

Page: 5 / 39

2
FEATURES:
Building instruction:
SPECIFICATION:
• Wingspan: 1800 mm
• Length: 1320 mm
• Flying weight: 1800 grams (With battery)
Recommend equipment:
• Motor: 2814 KV1000 brushless
• Engine: .25-.30 2T or a .30 4T
• ESC: 40A 3S 3000mAh
• Servo: >17 grams x 2
〜 3 pcs
• Prop: 11 x 4
• The Cloud Clipper 71" is a "Vintage " model
airplane which has been designed for 3 channel
R/C control. ( Elevator, Rudder and Motor)
• This kit is suitable for beginners to advanced mod-
ellers who want to build and fly a simple R/C plane
for leisurely sport flying.
• All parts are precision laser-cut and therefore they
fit together perfectly. This makes for quick and
accurate building.
• This model can be powered either with a nitro
engine (.25-302T or a .30 4T ) or with an electric
motor on 3S Li-Po battery
This Cloud Clipper kit includes precision pre-cut wing ribs, plywood formers, balsa wood strips/
sheets/blocks for the wing and stabilizers. Hardwoods and dowels for the fuselage, a set of piano
wire landing gear, a set of wheels, a hardware accessories pack, and a complete set of full size
building plans. Almost everything needed to build the basic airframe of this model is included. You
will need to supply your own covering film, power system, radio system, CA and epoxy glues, and
you are then ready to start building this wonderful balsa model kit.