39
TITAN 400 DC
EN
TROUBLESHOOTING
This device integrates a default management system. In the event of a default, error messages may be displayed.
Error code
Meaning
CAUSES
SOLUTIONS
Thermal protection
• Maximum duty cycle rea
-
ched.
• Air vents blocked.
• Wait for the thermal indicator light to turn off before
resuming.
• Pay attention to the duty cycle and make sure the air
flows.
• The of the optional anti-dust filter (ref. 046580) reduces
the duty cycle of the machine.
Mains voltage default.
Mains power is out of range or
one phase is missing.
Have your mains supply controlled by a qualified engineer.
The voltage between the different phases
must be between 340Veff and 460Veff.
Cooling liquid supply
default.
Cooling liquid below the mini
-
mum level.
Fill the cooling unit's tank.
Cooling liquid flow default.
The debit is below the recom-
mended minimum level for
water cooled torches.
Check the continuity of the circulation of the
cooling liquid in the torch.
Hardware Error.
Equipment problem.
Contact your distributor.
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
