11/43
Recommended combinations / Electrode grinding
Current (A)
Ø Electrode (mm)
= Ø wire (filler metal)
Ø Nozzle (mm) Flow rate (Argon L/mn)
0,5-5
10-130
1,6
9,8
6-7
4-7
130-190
2,4
11
7-8
To optimize the working, you have to use an electrode grinded as below :
d
l
REMOTE CONTROL
The remote control operates in TIG and MMA mode.
Connector technology
The CEL 250A TRI is equipped with a female socket for remote control. The specific 7 point male plug (product
ref.045699) enables connection to a manual remote control (RC) or foot pedal (PEd).
For the cabling layout, see the diagram below.
Connecting
1- Power up the machine
2- Plug the pedal/remote control to the connecting socket on the machine.
3- The screen will flash and display « No » (Nothing),
4- Select the type of control using keys
:
« No » (Nothing) / « RC »
(Remote Control) / « PEd »
(Pedal)
5- After 2 seconds the display will freeze on the chosen selection, then displays the welding current.
NB: In case of error, unplug the remote control, (« No » will be displayed) and re-start the connection process.
Remark: Remote type choice will be required each time the machine is powered up.
Functions
Manual remote control (ref.045675) / Pedal (ref.045682):
The remote control enables the variation of current from minimum intensity (DC: 10A / MMA: 10A) to an intensity
defined by the user.
In this configuration, all modes and functions of the machine are accessible and can be set.
THERMAL PROTECTION & DUTY CYCLE
•
Thermal protection: thermal protection indicator turns on and the cooling time is about 2 to 5 min according to
external temperature.
•
Leave the machine connected to the supply after welding in order to let it cool down
•
The welding unit describes an output characteristic of "constant current" type. The duty cycles following the norm
EN60974-1 (at 40°C on a 10mn cycle) are indicated in the table here below :
CEL 250A TRI
X% @
I
max X% @ I max
25%
250A 35% 250A
60%
180A 60% 200A
100% 160A 100% 180A
L = 3 x d for a low current
L = d for a strong current
L
D: Switch contact
C: Earth
B: Cursor
A: + 5V
Nb: The Potentiometer value must be 10 K
Ω
Ref.045699
