16
User manual
GYSPRESS PREMIUM 10T PUSH-PULL
Translation of the original
instructions
REPLACEMENT OF ARMS AND ACCESSORIES
Only use arms and accessories recommended by the manufacturer.
NOISE
Weighted sound power level: LWA = 78 dB
VIBRATION
Vibration emissions are below the imposed threshold of 2.5 m/s².
STARTING THE DEVICE
If the machine is to be disposed of, it must not be left in the open and should be taken to an authorised recycling centre.
INSTALLATION - USING THE PRODUCT
DESCRIPTION
This riveting machine has been specially designed for the installation of all the main types of rivets used and approved in the automotive repair in-
dustry:
• Self-piercing rivets «Punch Rivets»
• «Flow Form» rivets
Suitable for all riveting tasks on sheet metal (up to 8.3 mm thick).
TECHNICAL FEATURES
Riveter weight
4.1 kg
Max air system pressure
8 bar - 110 psi
Maximum clamping force
100 kN
HANDLING
All the necessary steps for correct use are outlined in this manual. Operating procedures that are not explicitly approved by the manufacturer, GYS,
are not permitted.
DESCRIPTION OF THE EQUIPMENT (I)
1- Steel arm
7-
AUTO / MANUAL mode
2- Lever (Push / Pull)
8-
Locking pin
3- Trigger
9-
Cylinder shaft
4- Handle
10-
Speed control
5- Air pressure adjustment
11-
Air output
6- Regulator
RIVETING ARM (II)
HR110
HR210
(optional)
HR310
(optional)
Reference
063310
063327
063334
Length
121 mm
236 mm
396 mm
Width
50 mm
50 mm
50 mm
Height
169 mm
215 mm
346 mm
Caliper opening
81 mm
81 mm
140 mm
Opening depth
52 mm
140 mm
248 mm
Weight
3 kg
5.4 kg
12.1 kg
option
HR210 + HR310 (delivered in a case)
064089
Case only + foam for arms HR210 + HR310
077546