EN
21
User manual
ERGO LIFT 1000 ROLL
Translation of the original
instructions
Step 4:
It is possible to move the supporting elements (= arms) of the lift at an angle of 180°. To do this, pull the handle to unlock the arm and choose a
different angled position.
2.5 - 3 m
1
2
Step 5:
Place the lever of the hydropneumatic pump in the «up» position and press the pedal to raise the
lift. The lift rises up while the pedal is pressed down. As soon as you release the pedal, the lift will
stop.
Once stopped, the lever must be returned to the neutral position, the middle point.
(STOP)
Positioning the lever in the middle allows the load to be safely locked in place
Place the lever of the hydropneumatic pump in the «down» position and press the pedal to lower
the lift. The lift will descend while the pedal is pressed down. As soon as you release the pedal,
the lift will stop.
Once stopped, the lever must be returned to the neutral position, the middle point.
Air
In case of emergency,
It is possible to stop the ascent or descent of the lift by disconnecting the
hydropneumatic pump from the air network. The load will stop moving and will remain in a locked
position. By reconnecting the air to the pump, it will be possible to raise or lower the load again.
Summary of Contents for 067950
Page 37: ......
