22
User manual
ERGO LIFT 1000 ROLL
Translation of the original
instructions
OPERATING INSTRUCTIONS
To achieve optimum safety, It is recommended to establish a zone in which other objects or walls will be a certain distance
away ( 2 meters minimum). All lowering and raising movements must be carried out with the utmost care on the part of the
operator. In the defined area, people are not allowed to stand while the lift is in motion. To ensure the safety of the operator, the
hydraulic module must be located at such a distance as to allow an escape route in case of emergency.
2 m
2 m
2 m
2 m
Make sure that the vehicle is as centred as possible on the longitudinal axis of the lift.
No
Then, spread the support arms completely and insert the rubber pads into the supports.
Only position the pads underneath the grip points provided by the vehicle manufacturers.
Once the support arm is properly positioned, check that it is securely in place and locked simply by moving it from right to left.
Raise the vehicle a short distance (all four wheels should leave the ground by about 10 to 15 cm) and check that the pads are correctly positioned and
that the vehicle is stable. Once this check has been carried out, lift the vehicle to the desired height.
Summary of Contents for 067950
Page 37: ......
