GYS 063044, Manual, Page: 25 / 112

25
NEOCUT 105
EN
MODE SELECTION
Cutting
6 modes are available. To make the right choice, please refer to the chapter «mode selection».
PRESSURE ADJUSTMENT
105A
6.0m
AUTO
1
3
4
2
By default, the screen looks like this:
1- Operating mode
2- Current
3- Torch length
4- Pressure*
*Pressure is automatically locked as default (indicated by the inscription AUTO and the closed padlock): the machine
takes care of setting the right pressure value according to various parameters (such as current, mode, torch length).
105A
6.0m
AUTO
3
To switch the pressure setting to manual mode, a long press on the scroll wheel
is required: a countdown will start next to the padlock.
Releasing the scroll wheel during the countdown cancels the pressure unlocking
action.
105A
6.0m
5.2
bar
optimal
At the end of the countdown, the following screen will appear:
- the padlock is open (symbolizing that the adjustment is possible)
- the current pressure is displayed (the value corresponds to the value used in
automatic mode)
- A bar-graph with a value gives the trend (the text «optimal» is displayed when
the chosen value corresponds perfectly to the value that would be used in auto-
matic mode).
105A
6.0m
5.2
bar
+0.2
Example of a pressure setting higher than the optimum value of +0.2bar
To return to automatic setting, press and hold down the scroll wheel: a countdown
will start next to the padlock.
At the end of the countdown, the setting will be in «AUTO» with the padlock
locked.
« SETUP » MENU (access via scroll wheel)
CONSUMABLES
AIR TEST
TORCH LENGHT
LOG BOOK
EN FR DE IT...
UNITS
EXIT