11
NOMAD POWER 30 COMPRESSOR
EN
Translation of the original instructions
USING AS BLAST PUMP
12V/10A power supply to the blast pump
1. lnsert one end of the blast pump power cable into the 12V output port
8
;
2. lnsert another end of the blast pump power cable into the car cigarette lighter
3. Press the switch button
9
to charge.
Blast pump instruction
1. Connect the air hose to the air outlet
15
, leave the air inlet free
14
.
2. Select the «PSl,BAR,KPA, KG/CM2» unit of the compressor with the button
10
.
3.Choosethevalueuptowhichthecompressorshouldinflatethetirewiththebuttons
11
. Per click to increase /
decrease a minimum unit, long press the button can quickly increase / decrease the value.
4. Pressing the switch of the blast pump for 3 s to normal start.
5.Whenthepumpreachtoaspecifiedvalue,itwillshutdownautomatically,toavoiddamagingthetire.Tostop
before the requested value is reached, quickly press the buttons
9
then
13
.
USING AS POWER SUPPLY
For Cell Phone or Tablet Instruction
1. Plug the switch cable to USB 5V 2A output port
5
.
2. Select appropriate connector and connect it to your mobile phones or tablet.
3. Press the switch button
9
to charge.
For power apply to 12 V vehicle products or 12 V electronics
1. Plug the optional switch cable to 12 V 10 A output port
8
.
2. Connect the optional switch cable and 12 V vehicle product or 12 V electronics.
3. Press the switch button
9
to power supply.
USING AS LED FLASH LIGHT
There are 4 modes of LED light appear in order (normal. strobe. SOS. off) if you press slightly.
1. Press the switch button
9
for 3 seconds, white LED light lit.
2. On the basis of white LED light lit, press the switch again, white leds into Flash mode.
3. On the basis of < 5 >, press the switch button again, the white LED light into the SOS mode.
4. On the basis of < 6 >, press the switch button again, white LED light off.
TECHNICAL SPECIFICATIONS
Size: 265 x 160 x 63mm
Weight: 1700g
Battery Capacity: 88.8 Wh
Output: 5V
1A; 5V
2A; 12V
10A
Input: 15V
1A; 12V
10A(supplypoweronlyforairinflater)
Full charging time: 7hours
Starting current: 500A
Peakcurrent: 1000A
Operating temperature : -20°C ~ 60°C
