FLASHLIGHT FUNCTION
Press the ON/OFF button (9) for 3 seconds to turn on the LEDs.
Briefly press the button (9) to switch lighting modes (3 available modes:
normal, stroboscope and SOS).
PROTECTIONS
This device is protected against overload, overheating, overintensity, deep discharge, short circuit and polarity reversal.
TROUBLESHOOTING, CAUSES, SOLUTIONS
TROUBLESHOOTING
CAUSES
SOLUTIONS
1
No answer while pressing the ON/
OFF button
The NOMAD POWER is discharged.
Charge the product.
2
Red LED on + beep
Short-circuit.
Check that the clamps are well
connected and unplug/plug back the
jumper cable.
Polarity reversal.
Check the polarity of the clamps and
disconnect/reconnect the smart start
cable.
3
No LED on.
The vehicle battery may be da
-
maged.
Confirm that the connection
of the clamps is correct. Press
the ""BOOST"" button and wait
for the GREEN LED to light up:
- If the GREEN LED lights up, at
-
tempt a start within 30 seconds.
- If the GREEN LED does not light up,
do not attempt to start and consult a
professional.
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
12
NOMAD POWER 500
EN
Translation of the original instructions
