background image

9

GB4.0 EXERCISE BIKE

ASSEMBLY INSTRUCTIONS

STEP 3. Handlebar Post and Handlebar Post cover 

Installation

Remove

 six M8x20 Bolts 

(20),four

 Ø8xØ16x1.5 

Washers (15) 

,two

 Ø8xØ20x2.0 Big Arc Washers(22) 

and six Spring Washers Ø8 (21) from the Main Frame 

(1). Remove bolts with the S6 Allen Wrench provided.

Insert the Handlebar Post 

cover 

(24) onto the tube of 

the Handlebar Post (5) and Slide the Handlebar Post 

cover 

(24).

Connect the Sensor Wire (23) from the Main Frame (1) 

to the Extension Sensor Wire (9) from the Handlebar 

Post (5).

Insert the Handlebar Post (5) onto the tube of the Main 

Frame (1) and lock with six M8x20 Bolts 

(20),four

 

Ø8xØ16x1.5 Washers (15) 

,two

 Ø8xØ20x2.0 Big Arc 

Washers(22) and six Spring Washers Ø8 (21)that 

were removed. Tighten bolts with the S6 Allen Wrench 

provided. 

STEP 4. Seat Post, Seat Post Cover and Seat 

Cushion Installation

Remove three M8

 Nuts (36) and three Ø16xØ8x1.5 

Washers (15) from underside of

the Seat Cushion (38).

Then attach the Seat Cushion (38) onto the triangle 

plate of Seat Sliding Tube(4) with three M8 Nuts 

(36) and three Ø16xØ8x1.5 Washers (15)  that were 

removed.

Remove one 

Ø8xØ20x2.0 Washers (35) and one 

Round Knob M10 (34)from below of the Seat Sliding 

Tube(4) .

Then attach the Seat Sliding Tube(4) onto the Seat 

Post(3) with one Ø8xØ20x2.0 Washers (35) and one 

Round Knob M

10 (34)that were removed.

Insert the Seat Post 

cover 

(33) onto the tube of the 

Seat Post (3) and Slide the Seat Post 

cover 

(33).

Attach the Seat Post (3) onto the tube of the Main 

Frame (1) with the Round Knob Knob M16*1.5(32).

NOTE:When adjusting the height of seat post,the 

maximum insert depth mark line cannot highter 

than the edge of seat post cover.

Adjusting the seat cushion:

Release the Round Knob M10 (34) and then slide the Seat Sliding Tube(4) forth or back direction 

for the suitable positon.Tighten the Round Knob(32

) after adjustment.

Summary of Contents for GB4.0





















Reviews: