background image

13

GB4.0 EXERCISE BIKE

COMPUTER OPERATION INSTRUCTIONS

HEART RATE CONTROL PROGRAM (P8-P10)

There are 3 selection for target pulse:

P8 - 55%     TARGET H.R= 55% of (220-AGE)

P9 - 75%     TARGET H.R= 75% of (220-AGE)

P10 - 90%   TARGET H.R= 90% of (220-AGE)

Setting Parameters for HEART RATE CONTROL:

Selecting “

One of HEART RATE CONTROL PROGRAM

” using UP OR DOWN KEY then pressing ENTER KEY. 

First parameter “TIME” will flash so value can be adjusted using UP OR DOWN KEY. Press ENTER KEY to save value 
& move to next parameter to be adjusted. Continue through all desired parameters, pressing START/STOP to start 

workout. 

Note:

 If Pulse is above or below (± 5) the TARGET H.R. computer will adjust the resistance load automatically. It will 

check every 10 seconds approx. l resistance load will increase or decrease. One of workout parameters counts down 
to be zero, it will have BEEP-sound and stop the workout automatically. Press START/STOP KEY to continue the 
workout to reach unfinished workout parameter.

TARGET HEART RATE PROGRAM (P11)

Setting Parameters for TARGET H.R.:

Selecting “

TARGET H.R.

” using UP OR DOWN KEY then pressing ENTER KEY. First parameter “TIME” will flash so 

value can be adjusted using UP OR DOWN KEY. Press ENTER KEY to save value & move to next parameter to be 
adjusted. Continue through all desired parameters, pressing START/STOP to start workout.

Note:

 If Pulse is above or below (± 5) the TARGET H.R. computer will adjust the resistance load automatically. It will 

check every 10 seconds approx. l resistance load will increase or decrease. One of workout parameters counts down 
to be zero, it will have BEEP-sound and stop the workout automatically. Press START/STOP KEY to continue the 
workout to reach unfinished workout parameter.

Summary of Contents for GB4.0





















Reviews: