All connections of the unit must be properly fastened and tightened.
The unit may be put into operation after these installation steps have been
completed.
Before each use, adjust the height of the seat according to your own preferences.
To adjust its position, lift the seat adjustment lever and move the seat up or down.
3.3.
Cleaning and maintenance
a)
Use only non-corrosive cleaning agents for cleaning the surfaces.
b)
After each cleaning, all the parts should be dried well before the unit is used
again.
c)
Store the unit in a dry and cool place protected from moisture and direct
sunlight.
d)
Do not spray the unit with a stream of water or immerse it in water.
