Click the
ALARM OUTPUT
menu and click the
each value.
Then click the value by button to change.
EVENT / SENSOR : ALARM OUTPUT
Determines the behavior and actions that will trigger each of the 4 alarm outputs.
Behavior settings
OPERATION
: The selected alarm output can be enabled or disabled.
MODE
: Can be either TRANSPARENT (the output is active only when the trigger criteria is present) or
LATCHED (the output is active for a set period of time after a trigger).
SYSTEM SETUP
SYSTEM SETUP
36
LATCHED (the output is active for a set period of time after a trigger).
HDD EVENT
: Determines whether a hard drive event triggers the alarm output.
TYPE
: Can be set to high (0V to +5V when activated) or low (+5V to 0V when activated).
DURATION
: In LATCHED mode, the time that the alarm output remains active after it has been triggered.
Action settings
ALARM
: Determines whether alarm inputs will trigger the alarm output.
VIDEO LOSS
: Determines whether video loss on any of the selected channels will trigger the alarm output.
MOTION
: Determines whether motion detection on any of the selected channels will trigger the alarm output.
Remember to select APPLY and press ENTER to save all settings before exiting these menus
