7
Instructions (cont.)
Note:
1. There should be 3-5 seconds rest between two times of pressing Steam Button in
order to obtain the best steaming result.
2. Fill the water to the MAX position before using this function.
3. In order to prevent the water leaking from soleplate , please do not press the
steam button continuously with more than 5 seconds.
Spraying Methods:
1. Fill the water in the iron as per water-filling methods.
2. Press water spray button.
3. Note: No matter what steam ironing of dry ironing is, spray will always be available
in any case.
Self- cleaning:
To remove dirt and dust, the iron should be cleaned at least once a month.
1. Fill the iron with water. Turn the steam regulator to no steam position and the
thermostat dial to the MIN position. Plug the iron into the mains socket. Turn the
thermostat dial to Max position.
2. When the power indicator light goes off. i.e. the steam iron is in its presetting
temperature.
3. Hold the iron horizontally over a sink or basin.
4. Press the “Self-Cleaning” button and hold it down while shaking the iron lightly to
eliminate the dirt. The plate gives off hot water and steam.
5. During this operation you can press the steam button a number of times, remembering
to pause for at least five seconds between one burst of steam and the next.
6. When the tank is empty, release the self-cleaning button.
7. Turning the thermostat dial to the MIN position and unplug the iron from the mains
socket. Leave the iron to cool and clean the plate with a soft cloth.
