6
Instructions
Filling With Water:
1. Set the steam regulator to”0”(=no steam)(only for steam iron).
2. Hold the iron by hand and slant the iron with 45°down, open the Water Filling
Cover.
3. Fill the water through the Water-Filling inlet.
Dry Ironing:
1. Before running the iron, please classify the clothes as per its washing label, as it will
be quicker for the iron to heat up that to cool, the clothes (such as synthetic fabric, silk
etc.)With lower ironing temperature shall be ironed firstly, and then iron the clothes
(such as wool, cotton and linen etc.)with higher temperature.
2. Stand the iron on its end, and turn the thermostat dial to the MIN position.
3. Plug in the iron and select the temperature by turning the thermostat dial. If there is
water in the reservoir, turn the steam regulator to OFF position. Wait until the indicator
light goes off showing that the required temperature has been reached.
Steam Ironing:
1. Fill water in the iron as per the water-filling methods.
2. Plug the appliance in the socket.
3. If only the thermostat dial is set to MAX position as per the temperature indicator,
steam iron will be available, otherwise water may leak from the soleplate.
4. It indicates that the temperature has been ready until the indicator light goes off.
5. Set the steam regulator correctly, increase the steam output by rotating the steam
regulator anticlockwise.
Caution: Synthetic Fabric, Nylon, Synthetic Silk and Silk cannot use the steam function.
Otherwise it will damage the finish surface.
Burst of Steam:
This function will be able to provide more steam to remove stubborn creases.
1. Set the thermostat dial button to MAX until the indicator light goes off.
2. Release the steam by pressing the steam button.
3. Wait for several minutes and let the steam penetrate through the fabric, and then
release more steam through pressing this buttons again.
