1.2.
Pre-drill a pilot hole through the tray mounting flange and into the mounting surface.
HARDWARE REQUIRED:
M6 or #10 SCREW
(not supplied)
Modular LED Cove Lighting System
INSTALLATION GUIDE
GVA Lighting, Inc. 3400 Ridgeway Drive, #14 Missisauga, Ontario L5L 0A2
Tel: + 1 905 569 6044 Email: [email protected]
gvalighting.com
IG-HL-COVE, 16-11-21
|
Page 5 / 9
Specifications are subject to change without notice. Every effort has been made to ensure that the information provided in this manual is accurate.
GVA Lighting Inc. is not responsible for printing or clerical errors. Refer to www.gvalighting.com for additional information.
HL-COVE
1.C. MOUNTING TRAY INSTALLATION
1.C.1
. Place mounting tray into pre-constructed architectural cove with glare control
folded down.
1.C.3.
Use M6 or #10 screws/bolts (supplied by others) to secure the aluminum mounting profile. Use fasteners suitable for the mounting surface. Mounting tape may be used if tool
access is difficult or impossible. Leave a 2mm (5/64in) gap between each mounting profile.
WARNING
Use mounting hardware suitable for the mounting surface. Use of innappropriate hardware may result in dismounting of the mounting profile and can result in
equipment damage, injuries, and death.
