Important information
viii
Warnings
WARNING
To prevent fire or shock hazard, do not expose the unit to rain or moisture. If the unit
is in a wet or damp environment, a rain cover must be used to protect it for personal
safety reasons (EN60065). The rain cover supplied with the unit protects it according to
safety specification EN60529 up to level IPX2 (spraying water).
To avoid electrical shock, do not remove covers or panels. Refer servicing to qualified
personnel only.
In case of an emergency ensure that the power is disconnected.
Use only fuses of the type and rating specified.
Connect the product only to a power source with the specified voltage rating.
The Base Station must always be connected to protective earth. Do not interrupt the
protection conductor inside or outside the unit. Do not disconnect the protective earth
terminal. Intentional interruption is prohibited and is likely to make the unit dangerous.
To prevent risk of overheating, ventilate the units correctly.
For safety reasons the Base Station must be mounted in a 19-inch rack which has
safety covers according to IEC65. When two Base Stations are mounted above each
other, the minimum distance between them must be 50mm or the rack must be force-
air cooled.
Triax cable systems
WARNING
Only connect a Triax cable from the same LDK camera family to the unit.
Do not allow system ground currents to exceed 1.5A in the outer shield of the Triax
cable or 0.2A in other cable shields.
It is strickly prohibited to short circuit the inner and outer shields of a Triax cable used
to connect a camera to a base station.
