Operating instructions | Video preferences
4-19
☞
Note
During the auto-white measurement process iris is set to Auto and 90% and the knee
is turned off.
Black balance is not necessary with this camera because of the continuous automatic
black control circuits.
4.8.7 Exposure time
The exposure time values of 1/200, 1/500 and 1/1000 of a second are used to capture
fast moving objects so that these can be played back sharply in slow motion. The value
selected depends on the speed of the moving object.
☞
Note
Increasing the exposure speed lowers the camera sensitivity proportionally.
Selecting the exposure time
The momentary up/down
Exposure time switch
(16) gives a choice of exposure time
settings.
Table 4-5. Exposure time values
Value
Function
Nom.
- nominal setting
Var.
- enables the exposure to be varied
CRT
- for shooting sync-locked monitors
Film
- to vary the exposure with running shutter
1/200
- for fast moving objects
1/500
- for fast moving objects
1/1000
- for fast moving objects
1/2000
- only with IT and ITW versions
EVR
- extended vertical resolution (IT only)
50 Hz
- shooting with 50Hz lighting (adjustable)
60 Hz
- shooting with 60Hz lighting (adjustable)
If an exposure time other than nominal is selected, the
Non-standard indicator
(33)
in the viewfinder lights.
