Installation | Transport case
2-2
If a unit is being returned to Thomson Broadcast and Media Solutions for servicing, try
to use the containers and materials of the original packaging. Attach a tag indicating
the type of service required, return address, model number, full serial number and the
return number which will be supplied by your Thomson Broadcast and Media Solutions
service centre.
If the original packing can no longer be used, the following general instructions should
be used for repacking with commercially available materials:
1.
Wrap unit in heavy paper or plastic.
2.
Use strong shipping container.
3.
Use a layer of shock-absorbing material around all sides of the unit to provide
firm cushioning and prevent movement inside container.
4.
Seal shipping container securely.
5.
Mark shipping container FRAGILE to ensure careful handling.
2.2 Transport case
It is important to protect your camera against damage when transporting it. To do this,
a transport case (LDK 5020/00) is optionally available for the camera, lens, viewfinder
and some accessories.
Figure 2-1. Transport case
Cle
ar
Cle
ar
A
1
Sta
r 4
P
ND
1/4
B
1
Sta
r 6
P
ND
1/
16
C
1
So
ft f
oc
us
ND
1/
64
D
1
Documentation
Packing inserts
Top light
Tripod plate
Battery
Additional supplies
The camera is packed in the transport case as shown in the figure above. This ensures
that the camera is not damaged during transport. Turn the 1.5-inch viewfinder
downwards so that it does not protrude above the top of the camera. Several foam
packing inserts are provided to enable different configurations of the camera to be
packed securely. These inserts are used to support the rear of the camera. Make sure
you use the correct foam insert for your particular configuration.
