»
SWITCH BETWEEN MANUAL AND AUTOMATIC MODE
With the thermostat on, press the button quickly to switch between
manual and automatic mode.
»
SET TEMPERATURE IN MANUAL MODE
With the thermostat turned on in manual mode, turn the knob to set the
desired temperature.
The thermostat turns on when the probe temperature is lower than the one
set at 1.5ºC and the symbol appears on the screen. This symbol means
that the cable or network is heating up. The thermostat switches off when the
probe temperature is higher than the one set at 1ºC.
»
PROGRAMMING ENERGY SAVING MODE / COMFORT MODE
With the thermostat on, press the button for 3 seconds to enter the settings
mode. Choose between the Energy Saving option or the Comfort
option and press the button quickly to enter the selected option.
Rotate the knob to select the desired temperature for the selected mode
and quickly press the button to return to the settings menu.
Wait 5 seconds to exit the settings menu.
»
DAILY SCHEDULES P1 P2 and P3
With the thermostat on, press the button for 3 seconds to enter the
settings mode. Select the symbol and quickly press the same button.
It will start at schedule 1 at 00:00, you must turn the button to select
between Energy Saver mode and Comfort mode.
Pressing the button again will switch to 01:00, 02:00 ... until 24:00. After
24h of program 1, it will go to 00h00 of program 2 and then program 3. The
settings of the 3 programs are defined.
These programs will run in a cycle, if you choose P1 it will repeat every day.
»
SELECT PROGRAMMING FOR AUTOMATIC MODE
With the thermostat on, press the button for 3s to enter the settings
mode. Select the symbol corresponding to the desired programming,
and quickly press the same button. Quickly press the button again to return to
the settings menu and wait 5 seconds to exit the settings menu. The selected
program symbol will appear on the display.
»
VACATION MODE
With the thermostat on, press the button for 3s to enter the settings
mode. Select the symbol and quickly press the same button. it will
define the number of days it will be absent and after pressing the button
again it will define the temperature at which the system will work.
Wait 5 seconds and the symbol will remain on the display.
Pressing the button will alternate between the number of days and the
desired temperature without leaving the vacation mode.
To cancel the vacation mode, go to the settings mode and select automatic or
manual mode.
»
CHILD LOCK
Regardless of whether the thermostat is on or off, press the side button for
3s. When you release the button, you will see the symbol on the display
indicating that the thermostat is locked.
Repeat the same procedure to unlock the thermostat.
P
1
P
2
P
3
Error
Cause
Solution
ERR
Floor probe error
Replace floor probe
AUTO
PROG
A1
Correction of temperature reading
A2
Floor probe limit temperature
A3
Child lock: Partial, Total;
A4
High temperature limit of the floor probe
A5
Ambient probe low temperature limit
A6
Minimum temperature correction of the ambient probe
A7
Programmable maximum temperature limit
A8
Non-programmable options
A9
Anti-freeze function
Enter settings mode and select the symbol to enter advanced
settings, turn to move to the next function.
»
GENERAL FUNCTIONS TABLE
VIII - ADVANCED SETTINGS
VII - ERROR TABLE
AA
Memory (0 - on; 1 - Off)
AB
Temperature Unit (ºC / ºF)
AC
Descaling function (not applicable)
AD
Probes (N1 - room, N2 - floor, N3 - both)
AE
Restore Factory Settings
GLOBOVAC Ltd.
Address:
Globovac Ltd, 8C Castle Road, Chelston
Business Park, Wellington, Somerset
TA21 9JQ, United Kingdom
Tel Export:
+44 (0) 1293 768 210
Tel UK Costumers:
+44 (0) 1293 772 165
Email:
Web:
www.globovac.com
