6
INSTALLATION INSTRUCTIONS
p
Before Using Your Wine Cooler
• Remove the exterior and interior packing.
• Before connecting the Wine Cooler to the power source, let it stand upright for
approximately 2 hours. This will reduce the possibility of a malfunction in the cooling
system from handling during transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
• This appliance is intended to be used in household and similar applications such as
– staff kitchen areas in shops, offices and other working environments;
– farm houses and by clients in hotels, motels and other residential type
environments;
– bed and breakfast type environments;
– catering and similar non-retail applications.
• When disposing your appliance, please choose an authorized disposal site.
p
Installation of Your Wine Cooler
• This appliance is designed to be for free standing installation or built-in (fully
recessed) (Refer to sticker location the back of this appliance).
•
This appliance is intended to be used exclusively for the storage of wine.
• Place your Wine Cooler on a floor that is strong enough to support it when it is fully
loaded. To level your Wine Cooler, adjust the front leveling leg at the bottom of the
Wine Cooler.
• This appliance is using flammability refrigerant. So never damage the cooling
pipework during the transportation. Locate the Wine Cooler away from direct
sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect
the acrylic coating and heat sources may increase electrical consumption. Extreme
cold ambient temperatures may also cause the unit not to perform properly.
• Avoid locating the unit in moist areas.
• Plug the Wine Cooler into an exclusive, properly installed-grounded wall outlet. Do
not under any circumstances cut or remove the third (ground) prong from the power
cord. Any questions concerning power and/or grounding should be directed toward
a certified electrician or an authorized Products service center.
