![background image](http://html1.mh-extra.com/html/guzzanti/gz-503/gz-503_user-manual_2279502030.webp)
THANK YOU VERY MUCH FOR BUYING OUR PRODUCTS PRODUCT. BEFORE USE,
PLEASE READ THIS OPERATION MANUAL TO ENSURE THAT YOU GAIN THE MAXIMUM
BENEFIT FROM IT.
*TIPS:
Please properly place safebox before use.
After well placed the safebox please immediately install the battery and revise code, do not keep the
manual key in the safebox.
*Install safebox
(Note: Drill holes are loacted under and back of the safebox)
1.On concrete base:
Drill the holes in the concrete according to position of the drilled holes of safebox, put the expandable
shell in the holes and use the expansion bolt to fix the safebox.
2.On wooden base:
Drill holes according to the position of the drilled holes of safebox, use tapping screws to fix the
safebox.
Specification:
Operating instructions
1. Install battery
Open the safe with emergency key. Install 4pcs AA (1.5V) batteries to the battery compartment on
inside door. „HELLO” will display on the screen.
2. Lock the safe
Enter a 3-6 digits personal password while door is closed and press ”#” to confirm. „CLOSE” will
display on screen. Press “#” to lock the safe within 5 minutes after unlocking, the cold remain the
same.
If the striking plate is blocked by the cabinet when locking the door, display will show “ERROR”.
Please reopen the door and ensure the door is closed again, then re-operate.
3. Open the safe
1) To End User – Guest Code (Default guest code is 123.)
Enter the correct 3~6 digits guest code. The door will be opened with “OPEN” on screen.
(Before enter the code, press “*” to hide the code, and screen will show “-” instead of showing the
numbers.
2) To Hotel Management – Master Code
(
Default guest code is
“000000”)
a) Press “*” twice when the safe is closed, screen shows “SUPER”
b) Enter six-digits Master code, screen shows “CC--”
c) Enter “00” and press “#”, screen shows “OPENED”,door will open automatically.
Panel
LED display
USB outlet
Emergency outlet
Recessed handle
Keypad