Pic.7
- light on/off
1 – 1 speed (low speed)
2 – 2 speed (average speed)
3 – 3 speed (high speed)
Switch on a cooker hood:
- press on any of the sensor speed control knobs (1, 2, 3);
- turn on lighting if necessary (button with bulb symbol).
Switch off a cooker hood:
- press the speed control knob (1, 2, 3) on the sensor, depending on the speed at which the cooker hood (1-1,
2-2, 3-3) works.
The switching the hood on and off with the touch switch is double-pressing, that is, pressing the speed 1 – the
cooker hood is switched on, press speed 1 again – the cooker hood is turned off.
Starting the timer:
To start the timer, press one of the touch buttons (1, 2, 3) and hold it for 5 seconds.
The timer will automatically switch off the cooker hood in 5 minutes.
7.4 Control of cooker hood using a remote control (Pic. 7).
-
Press the buttons 1, 4 or 5 to switch on the cooker hood. To switch off the hood,
press the button 1.
-
To increase or decrease the speed, press the button 5 or 4, respectively.
-
Press the button 2 to switch the light on or off.
-
To activate the timer, press the button 6 when the cooker hood is switched on.
-
To switch off the timer, press the buttons 6.
8. MAINTENANCE INSTRUCTIONS
Attention!
Before cleaning the extractor hood, disconnect it from the electricity.
8.1
Use a damp cloth soaked in warm water with a neutral detergent for external cleaning of the painted
extractor hood.
8.2 Never use abrasive detergents, coarse sponges or detergents containing soda, acid, chlorides or
solvents to clean the extractor hood.
8.3
When cleaning, avoid getting moisture on the current-carrying parts of the extractor hood, and wipe the
surfaces with a soft cloth after washing.
8.4
The aluminum filter, holding oil and dust from the air, is clogged and should be washed after being
soaked in hot water with an effective detergent once every 1.5 to 2 months.
Changing the color of the filter after
washing does not affect the quality of its work.
8.5
To remove the aluminum filter, press the spring latch and remove the filter from the panel. Install the
filter in reverse order
(Pic. 8).
Do not install the filter after washing until it is completely dry.
Pic.6
Summary of Contents for GZ-443
