11
We have seen in the example above that the automatic cooking process can be immediately started
by setting the cooking time. By pressing the button “M” three times, you can see and adjust, if
necessary, the time when the food is ready (end of cooking). In the example below, the food in the
oven is set to be ready at 21:30.
1) Pressing the button “M” three times. The ‘End’ signal and the time when the food is ready will be
shown one after another, 18:30+2:15=20:45.
2) Set the end of cooking time using the
b or -.
3)In a few seconds, the screen will
show the current time.
In this case, we have programmed our oven so that your food will be ready at 21:30. We have
programmed the cooking time before to 2 hours and 15 minutes. In this case, the oven starts cooking
at 19:15 and will cook for 2 hours and 15 minutes and the cooking program will finish at 21:30.
The screen to be displayed
when cooking starts
The screen to be displayed
when cooking finishes
When the cooking program has finished, the buzzer is activated and it will play for 7 minutes if not
silenced.
1) Turn off the oven.
2) Reset the oven time.
Note: The oven will be deactivated until you switch your timing module to manual
mode.
In the example above, first the cooking time is set and the end of cooking time automatically calculated
has been changed by us in the second phase. You can also set the end of cooking time first if you
want; in this case, the cooking time will be automatically calculated and can be changed in the second
phase if desired.
