9
USING THE DIGITAL PROGRAMMER
OVERVIEW
OT-2000-LED-CL-X3FA6X is an electronic timing module that allows your food in the oven to be ready
for service at any time you want. You only need to program the cooking time and the time that you
want your food to be ready. It can also be used as a minute-programmed alarm clock independent
from the oven.
WHEN THE POWER IS SUPPLIED
When the power is first supplied, the oven is deactivated. The time and letter A are flashing on the
screen. The time that seems on the screen is not correct and should be adjusted (see. Time settings).
To set the cooking program, you should first switch to Manual Mode (see. Manual Mode)
MANUAL MODE
1) Press ‘MI button to switch to manual
mode.
OR
2) Press the keys + and - at the same
time to switch to manual mode.
TIME SETTING:
The time can be set only in a cooking program. First press the keys + and - at the same time and then
you can set the time forward and backward using the keys + and -. A long press on these buttons will
change the time faster.
1) Press + and - at the same time.
2) Set the time using the keys + or -.
Note: If the button - or + is not pressed for 5 seconds, the time setting mode automatically stops. You
can stop the time setting mode immediately by pressing the keys + and - at the same time.
