![background image](http://html1.mh-extra.com/html/guzzanti/8594186721290/8594186721290_instruction-manual_2279504214.webp)
18
Note:
The above settings of tension and overedge cutting width dial are for general guidance. A little fine tuning
will improve your stitching in many cases. Following advice helps you.
1. Turn overedge cutting width dial.
2. Adjust needle tensions when you sew thin or thick material.
3. Reduce the tension when you use thick thread.
4. Incorrect tension setting causes stitch skipping. Adjust the tension setting.
5. Tension setting will have problem when needle setting is incorrect.
Try test-sewing with a piece of fabric you are going to use and find the best settings.
THREE-THREAD OVERLOCK WITH ONE NEEDLE
By threading the LEFT needle only a width of 6 mm will be produced and by threading the RIGHT needle only
a width of 3.8 mm will be produced.
F $
Two-thread overlock
convertor
Upper looper
Fig. 2
Fig. 3
Fig. 1
Fig. 4