8
How to drain out the water from the internal tank and big water reservoir completely
Because the water in the big water reservoir is stop to drain port by the water valve,
if you want to drain away all the water, please plug on the unit and but don’t start the
unit, then remove the drain port cap at the back. Wait some minutes, all of the water
will flow out.
USING YOUR ICE MAKER
Operation panel and display area
212))
7,0(5
1. Remove the cover of the water reservoir and pour potable water into water
reservoir. And be sure to keep water level below the max. level with FULL mark
displayed in following picture.
Then move back the cover at once to avoid
foreign matter enter.
Cover for the
water reservoir
Warning: Do not pour the water into the internal water tank located underneath the
ice basket. This tank is not big enough and will effect the ice making performance.
2. When you plug the unit, the power symbol <
> will flash. Press the <ON/OFF>,
button, the unit will start making ice cube, ice making symbol <
> . will keep
running. The left up corner of display area will show the ambient temp,i.e:26 means
the ambient temp is 26°C.After several mines, this area will show flash number, the
ice making will countdown,i.e:10M means the ice making will finish 10 mines later.
Operation area
Display area
Operation area
