7
6. When the machine is not in use for a long time, open the water drain cap to drain
water completely out from the water reservoir.
After using your ice maker for a long time, we also suggest you should clean your
unit.
Especially to the water separator pipe and the water filters, you must clean them
periodically.
1. If the water separator pipe is blocked and there is no water flowing down when you
listen the compressor and the water pump inside are still working, please turn off
the unit first and disassemble this pipe down, and clean it. Clean the each hole on
the pipe wall displayed in following picture. After cleaning, install back the water
separator pipe and be sure the right terminal of the pipe connect to the silicone
pipe well and as original.
2. For both of the water tank and the big water reservoir, clean them with diluted
detergent, warm water and a soft cloth. Then use the water to rinse the inside, and
drain out the water from the draining port by unplugging the drain cap on the back.
It will help you keep the unit and ice-cube hygienicly, and also make the unit work
normally.
3. When cleaning, if find that the ice cube left on the evaporator and can not be taken
out easily, you can turn on the unit to let the unit enter the ice making process,
then press “ON/OFF” button for more than 5 seconds to let the unit start ice harvest
process to melt the ice cube.It will help you remove the hard ice cube.
Water separator pipe
Hole
Evaporator
