EN
21
2.
Operation via switch
The buttons for the emergency operation of the hood are located on the unit on the right
of the twoside bars.
( Not all functions are available )
Button
Push
Execution
1
1x
Lighting ON
1
1x long
Lighting dimmer
-
funktion
1
1x
Lighting OFF
2
> 5 sec.
Colour temperature adjustment
Pressing and holding button
(b)
will start the color change ( 2700
-
6500K ) and the last value will also be stored when released.
( only available when the engine is stopped )
2
1x
Fan ON Motor runs at level 1
3
1x
Fan speed increases to level 2
3
1x
Fan speed increases to level 3
3
4x
Fan power increases to intensive level
Motor automatically switches back to level 3 after 5 minutes.
4
Fan speed is reduced
2
> 3 sec.
Motor switches off
LED
-
status
-
display
(a)
ON
Overrun (LED flashes)
green LED
Level
1
green LED
Level
2
green LED
Level
3
green LED
Intensive Level
4
green LED
(f)
Filter satur
-
ation indicator
red LED
OPERATING INSTRUCTIONS
LED a:
Display operating status
ON / OFF
LED a:
Flashing: display automatic follow
-
up time
( the hood switches automatically within a short time one power stage at a time
down to final shutdown )
LED 1:
Fan power stage
1
( low motor power )
Press button right / button 2 of the remote control once.
LED 2:
Fan power stage
2
( average motor power )
Right button / Press button 2 of the remote control twice
LED 3:
Fan power stage
3
( high motor power )
Press button right / button 2 of the remote control three times.
LED 4:
Flashes Intensive level ( motor automatically switches back to level 3 after 5 min )
Press the right button four times / Press button 3 on the remote control.
LED f:
Display filter saturation
When the red LED lights up, the metal filters must be cleaned ( see section
cleaning and care ) .
The filter saturation indicator lights up after max. 15 hours of operation . ( even
when not cooking )
-
push button
(2)
about 10 seconds for reset.
Device has to be active
-
an
-
motor first has to be switched off. ????
+
_
